ProScan PS20112 Spezifikationen PDF herunterladen (Seite 38)

• Cah,le-T.V Conn_ctionls, ioconltinued '

D. Follow this diagram if your cable company requires a converter/decoder box for premium channels and you also want to

connect a VCR.

Incoming

Cable

2-way SignalSplitter*_

(suchas AH047)

Conveaer/DecoderBox

Remember to tune the VCR to

the output channel of the

converter box (usually 2, 3, or 4).

CoaxialAntennaCables*

(suchas AH037orAH065G)

Back of VCR

Back of TV

CABLE/ANTENNA

ANTA

ANT B

CONVERTER

Remember to tune the TV to the output

channel of the VCR (usually 3 or 4)-the

same channel as the position of the VCR's

CH3/CH4switch.

Most cable companies that require use of a converter/decoder

box only require the box for scrambled premium channels

like HBO or Showtime. All the other cable-TV channels can

usually be viewed without the converter box. Therefore, by

using a signal splitter, you can send the incoming cable-TV

signals directly to the TV and also thru the converter/decoder

box and VCR as shown above.

You can easily switch between the signals coming into the

ANTA jack and the ANTBjack by pressing the ANTENNAbutton

on the remote control. The channel numbers will change

colors to let you know which antenna signals you are

watching. When the numbers are blue, you are seeing the

ANTA signals. When the numbers are yellow, you are seeing

the ANTB signals.

The cable-TV channels that are not scrambled can then be

seen whenever the TV is receiving the ANTA signals. The

cable-TV channel_ that are scrambled can then be seen thru

the converter box and then thru the VCR whenever the TV is

receiving the ANTBsignals. Most VCRs will feed the signal

thru their _ntenna jacks even when the VCR is turned off.

This allows you to watch scrambled channels from the

converter box without having to turn on the VCR.

This connection can be useful because it will let you record a

scrambled channel on the VCR at the same time you are

watching a non-scrambled channel thru the ANTAjack on the

TV.

For stereo playback, be sure to also connect the audio/video

cables from the VCR to the TV as shown on pages 37-40.

The VCR must be turned on and tuned to the output channel

of the cable box (usually 2, 3, or 4) for stereo playback.

Note: Be sure to also connect the VCR's AUDIOand VIDEOOUTjacks to

the TV's AUDIOand VIDEOINjacks as shown on pages 37-38. The

audio/video connections are necessary for stereo playback from the

VCR. To see the signals from the VCR that are going into the TV's

INPUTjacks, select TV channel 91 if you connected the VCR to the

INPUT 1 jacks or select channel 92 _fyou connected the VCR to the

INPUT 2 jacks. Select TV channel q0 if you have an S-VHS VCR

connected to the TV's S-VIDEOconnector.

:34

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 53 54

Kommentare zu diesen Handbüchern

Keine Kommentare

ProScan PS20112 Spezifikationen Seite 38

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für LCD-Fernseher ProScan PS20112