ProScan 15LA12Q Betriebsanweisung PDF herunterladen (Seite 10)

RC-U49C+ REMOTE CONTROL (CONTINUED)

Code Number Readback

To identify the 3-digit setup codes stored under the Point and Press

programming method, follow these steps:

1. For the TV code, press and hold the TV and SELECT keys at the same time until the TV button illuminates.

2. Press the INFO key. The TV button will "blink back" the code numbers, with a 1-second interval between each digit of

the code. Example: For code "035", the indicator light will blink 10 times, then 3 times, then 5 times. Once you have

found the code, write it down here for future reference _______________________

3. For the VCR code, follow steps 1 and 2 using the VCR and SELECT keys. Once you have found the code,

write it down here for future reference _______________________

4. For the DVD code, follow steps 1 and 2 using the VCR and SELECT keys. Once you have found the code,

write it down here for future reference _______________________

5. For the AUDIO code, follow steps 1 and 2 using the AUDIO and SELECT keys. Once you have found the code,

write it down here for future reference _______________________

CODE-ENTRY PROGRAMMING

How to Program the TV Mode Key

1. Turn on your TV. On your remote control, press and hold SELECT, then MUTE together until the POWER/MODE buttons

illuminate in slow rotation (i.e. CBL > TV > VIDEO > AUDIO > CBL..).

2. Refer to the list of TV Setup Codes on page 68. Using the remote control keypad, enter your 3-digit setup code.

You may have to enter several different codes until your TV turns off.

3. As soon as you have entered a 3-digit code that turns your TV off, press MUTE. If the TV turns back on, press SELECT

to lock in the code. The POWER/MODE buttons will blink 3 times and go out. If the TV does not turn back on, enter

a different 3-digit setup code until your TV turns back on. Then press SELECT to lock in the code. The POWER/MODE

buttons will blink 3 times and go out.

4. If the TV turns on, write the code you used here: TV ________________

Note : If your TV or VCR/DVD brand is not listed in the appendix or if none of the codes works, refer to "Point

and Press

Programming" section.

How to Program the VCR/DVD Mode Key

1. To program your VCR or DVD, repeat steps 1 to 4 above, substituting the TV indications for your VCR.

2. Write the code you used here: VCR ________________ DVD ________________

How to Program a TV/VCR Combination Unit

1. First, turn on your TV/VCR combination device and install a VHS tape.

2. Next, program your remote to operate the TV functions. Using the Code Entry Programming method described above,

find a TV Setup Code that operates the TV functions (Power, Vol. +/-, Mute) of your TV/VCR unit.

3. Using the Code Entry Programming method described above, enter, lock and test each 3-digit VCR Setup Code for

your brand until a code is found that operates the transport functions of your TV/VCR unit.

Located in the bottom right corner of the remote, the VCR/VOD key is used to activate the dedicated

Video-on-Demand and VCR keys.

• Slide it to the VOD position when using Video-on-Demand, and to the VCR position when using the VCR.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 18 19

Keine Kommentare

ProScan 15LA12Q Betriebsanweisung Seite 10